Magellan 310 - Manual (Page 20)

Map Screen The Map screen has two modes,
position or cursor. In the position mode, your present
position is indicated by the large arrow icon in the
center of the display. If you are moving, the arrow will
point in the direction that you are heading. At the
bottom of the screen is the scale for the map displayed
and two data fields that can be customized, or turned
off, depending upon your needs.
In the Cursor Mode, you are provided with a cursor that
can be moved on the map. At the bottom of the display
is the information for the position of the cursor relative
to your present position. Also any points of interest that
the cursor is over will be shown.
To access the Cursor Mode, press any arrow on the
keypad. A crosshair appears that can be moved with the
arrow keys.
To return to the Position Mode, press [ESC]. The cursor will disappear and
the present position icon will appear centered on the map.
Compass Screen. This is a handy screen to have at
your fingertips while you are navigating. It is totally
customizable to display the information that is useful to
you. The lower portion of the Compass screen not only
displays your heading in a graphical manner, but also
displays the relationship of the sun, moon and your
destination (if navigating on a route) to your heading.
Large Data Screen. The Large Data screen is similar
to the Compass screen but here the compass has been
removed to allow for large display of the navigation
data. Ideal for when you have your Meridian mounted
on the dashboard of a boat using the optional swivel
mounting bracket. Even from a distance the
information can be read with ease.
Magellan Meridian GPS Receiver 10