Magellan 310 - Manual (Page 34)

Reference
Turning On/Off Displayed POI’s — [Available only if a map has been
uploaded from a Magellan MapSend Streets and Destinations or
MapSend Topo for the United States CD-ROM] Allows you to select
which, if any, POIs that have been uploaded from a MapSend product
to be displayed. Default is On.
MENU Highlight
Map Setup
Use L/R
select
ENTER Use U/D
select POI
ENTER
From
the MAP
Screen
arrows to
“Display” tab
arrows to
Globally Turn Map Items On/Off — If you have uploaded map data
from a MapSend product, you will notice that the list of POIs can be
extremely lengthy. To aide you in the customization of the display you
can turn everything on or off globally.
To turn off all map items, follow these instructions.
MENU Highlight
Map Setup
Use L/R
select
ENTER Use U/D
select
Clear All
ENTER
From
the MAP
Screen
arrows to
“Display” tab
arrows to
After you have turned off all of the map items, you can go back and just
select the POIs that you want to view. Please note that this function
will also turn off waypoints, track lines and, if applicable, topo lines. Be
sure to turn these back on if you want to see them.
Inversely, to globally turn on all of the map items, follow the above steps
but select “Mark All” instead of “Clear All”.
Setting Up Map Data Fields — The following options are available ONLY
if you are in the Position Mode of the Map screen. If you are in the
cursor mode, press the ESC key and the display will snap back to the
Position Mode with the arrow icon displaying your present postion. (If
you are not clear on which mode you are in, the simpliest way to
determine it is to see what cursor is displayed; an arrow indicates
Position and a crosshair indicates Cursor. If you press the ESC key and
the display changes to another Nav Screen you were in the Position
Mode and you can press NAV to return to the map.
24 Magellan Meridian GPS Receiver