Makita G12010R - Manual (Page 24)

13
(1) AC APPLICATION
(a) Ground the generator, using the
ground terminal located at the side of
the panel.
(b) Before starting the engine, check that
the no-fuse breaker of the generator
and the power switches of the
appliances are turned off.
(c) Connect the plugs of the appliances to
the receptacles before starting the
engine. If you wish to use for a long
period of time, connecting to the output
terminal is recommended.
(d) Start the engine and check that the
voltage meter is indicating correct
voltage.
ON
OFF
Grounding spike