Miro Displays TD570 - Manual (Page 11)

T IMING T ABLE
Resolution Frequency
Preset Horizontal Vertical Pixel Rate Vertical
M1 640 480 25.175MHz 60.0Hz
VGA M2 720 400 28.322MHz 70.0Hz
M3 640 480 30.240MHz 67.0Hz
M4 640 480 31.500MHz 75.0Hz
M5 800 600 36.000MHz 56.0Hz
SVGA M6 800 600 40.000MHz 60.0Hz
M7 800 600 50.000MHz 72.0Hz
M8 800 600 49.500MHz 75.0Hz
M9 1024 768 65.000MHz 60.0Hz
XGA M10 1024 768 75.000MHz 70.0Hz
M11 1024 768 78.750MHz 75.0Hz
SXGA M12 1280 1024 108.000MHz 60.0Hz
M13 1280 1024 135.000MHz 75.0Hz
M14 832 624 57.280MHz 74.5Hz
Note: In case of using Macintosh TM , you may need a Mac adapter.
12 13
P IN A SSIGNMENT
VGA Connector VGA CONNECTOR
Pin 1 Red 1 5
Pin 2 Green
Pin 3 Blue 6 10
Pin 4 NC
Pin 5 Ground
Pin 6 Ground 11 15
Pin 7 Ground
Pin 8 Ground
Pin 9 +5V for DDC
Pin 10 Ground
Pin 11 NC
Pin 12 DDC SDA
Pin 13 Horizontal Sync.
Pin 14 Vertical Sync.
Pin 15 DDC SCL
Note: When resolutions are shown that are lower than the pixel count of the LCD
panel, text may appear choppy or bold. This is normal all current flat panel
technologies when displaying non-native resolutions on a full screen (below than
1280 x 1024 resolution). In flat panel technologies, each dot on the screen is
actually one pixel, so to expand resolutions to full screen, an interpolation of the
resolution must be down. When the interpolated resolution is not an exact
multiple of the native resolution, the mathematical interpolation necessary may
cause some lines to appear thicker than others.
En
gli
sh
En
gli
sh