Miro Displays TD570 - Manual (Page 13)

16 17
T ROUBLESHOOTING
Double (split) screen image.
ü Make sure your graphics card is set to Non-Interlaced mode.
Entire screen image rolls (scrolls) vertically.
ü Make sure the input signals are within the LCD monitor’s specified
frequency range.
(Maximum: VESA, MAC 1280 x 1024 @75Hz)
ü Connect the video cable securely.
ü Try the miro Monitor with another power source.
Control buttons do not work.
ü Press only one button at a time.
The LCD contains over 3,932,160 thin-film transistors (TFTs).
A small number of missing, discolored, or lighted dots on the screen is
an intrinsic characteristic of TFT LCD technology and is not an LCD
defect.
If you display a fixed pattern for more than 10 hours, its image may
remain on the screen in overlap mode when you display something
else.
ABOUT THE LCD
En
gli
sh
En
gli
sh