Motorola VT1000v - Manual (Page 20)

14
4 Verify that all fields are correctly filled in and click Save Changes. The message
This will require a reboot of the unit. Are you sure?
is displayed.
5 Click OK. Wait about two minutes. You cannot display the configuration pages while
the Motorola voice terminal reboots. After the Motorola voice terminal reboots, click
the web browser Refresh button to display the configuration pages.
6 Pick up the telephone hand set and listen for a dial tone. If you hear a dial tone, you
can now place a phone call as you would with any telephone.
Specify DNS
Servers Enables you to specify Domain Name System (DNS) servers, if
necessary:
■ If Obtain IP Address Dynamically or Enable PPPoE are checked,
Specify DNS Servers is unchecked by default. If required by your
broadband provider only, check this box and type the DNS server
IP addresses provided by your broadband provider.
■ If Specify Static IP Address is checked, Specify DNS Servers is
checked by default. Because no DNS server is automatically
assigned, you need to type the DNS server IP addresses
provided by your broadband provider.
VT1000User.book Page 14 Monday, November 3, 2003 4:19 PM