Motorola MICOM-2ES/2RS/2TS ALE User Manual
Page 48
MICOM-2ES/2RS/2TS ALE Supplement to Owner’s Guide
➤
To send global AllCall using the
ESC
key:
1. Press
ESC
continuously for a few seconds. The
radio starts sending the GL AllCall.
During this process, you will see TO alternating with
the number of the channel on which the set up
request is being sent.
TO
GL ALLCALL
MOTOROLA
STOP
NET GRP ANYs
CH 2
GL ALLCALL
MOTOROLA
STOP
NET GRP ANYs
Note
While the radio is initializing the link, you can press
STOP
(F1)
or
ESC
to abort the entire process.
2. After a delay, you will see LINK with a flashing GL
ALLCALL.
LINK
GL ALLCALL
MOTOROLA
3. Confirm the link set up by pressing
ENTER
or the
PTT. The GL ALLCALL message stops flashing,
and you can start talking.
LINK
GL ALLCALL
MOTOROLA
STOP
PAGE
GRP
MONs
4. Press
PAGE
(F2) if you want to send a message.
See page 31 for details.
5. To end the call, press
ESC
.
END CALLING
MOTOROLA
➤
To send global AllCall using the CALL function:
1. Press
CALL
(F1).
The radio displays the last called address.
CALL
1001
MOTOROLA
SEND PAGE CHAN
MON
s
2. Press the
UP
/
DOWN
keys until you reach GL
ALLCALL.
CALL
GL ALLCALL
MOTOROLA
SEND PAGE
CHAN MON
s
3. Press
PAGE
(F2) if you want to add a message to the call. See page 30 for
details.
4. Press
SEND
(F1) or
ENTER
to start the call.
The call now proceeds as for call initiated by pressing the
ESC
key.
34
_________________________________________________________________________________________________