Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 63)

New ALE Features
Note
During the bidirectional handshake process, you can press STOP
(F1) or ESC to abort the entire process.
➤ To execute a bidirectional handshake with a net:
1. Press LQA (F2) to enter the LQA menu.
LQA
MOTOROLA
BDIR SOND CHAN OK s
2. Press BIDR (F1).
The last called address is displayed. If this is the net
you want, skip directly to Step 8 below.
BDIR
1001
MOTOROLA
SEND PAGE CHAN OK s
3. Press MORE .
BDIR
1001
MOTOROLA
MULT PAGE CHAN OK s
4. Press MULT (F1).
BDIR
NET 1
MOTOROLA
SEND PAGE CHAN OK s
5. Press NET (F1).
BDIR
MOTOROLA
NET PAGE CHAN OK s
Note
You cannot change the net number at this stage – the bidirectional
handshake is always performed on the currently selected net. To
change the net, see page 24.
6. Press PAGE (F2) if you want to attach a message to the handshake.
7. Press CHAN (F3) if you want to initiate the handshake on a specific
channel.
8. Press SEND (F1) or ENTER to initiate the handshake. During this process,
you will see TO alternating with the number of the channel on which the
handshake is being sent.
Note
While the radio is initializing the handshake, you can press STOP
(F1) or ESC to abort the entire process.
_________________________________________________________________________________________________
49