Motorola MICOM-2ES/2RS/2TS ALE - Manual (Page 57)

New ALE Features
6. Select the AnyCall address:
• To send a general AnyCall, press ? (F1).
ALL
ENDING:_
MOTOROLA
? PAGE CHAN CLR
• To send a selective AnyCall, enter the desired
character (any character except #, @ or ?).
ALL
ENDING:1_
MOTOROLA
? <-- CHAN CLR
• To send a double-selective AnyCall, enter two
characters.
ALL
ENDING:59
MOTOROLA
? <-- CHAN CLR
7. Confirm your selection by pressing ENTER (see below examples for the 3
types of addresses).
CALL
ANY
@@
?
MOTOROLA
SEND PAGE CHAN SEL s
CALL
ANY
@@
2
MOTOROLA
SEND PAGE CHAN SEL s
CALL
ANY
@
59
MOTOROLA
SEND PAGE CHAN SEL s
8. Press PAGE (F2) if you want to attach a message to the call.
9. Press CHAN (F3) if you want to initiate the call on a specific channel.
Press SEND (F1) or ENTER to initiate the call. The radio now starts the
AnyCall process. During this process, you will see TO alternating with the
number of the channel on which the request is being sent.
Note
You can press STOP (F1) or ESC to abort the entire process.
When an AnyCall is transmitted, the initiator of the
call receives an indication of each station answering
the call (its address flashes in the display, until
replaced by the next answering station).
LINK
1111
MOTOROLA
10. After a programmed interval (or after 16 stations
answer, whichever comes first), the link is
established. Now you can start talking.
LINK
ANY
MOTOROLA
SEND PAGE GLOB MONs
11. To end the call, press ESC .
END CALLING
MOTOROLA
_________________________________________________________________________________________________
43