Musical Fidelity KW250S - Manual (Page 10)

KW250S
REMOTE CONTROL
Issue 3: 12th July 2006
The remote control shown below enables functions to be operated from a convenient distance.
Equivalent buttons on the remote control have the same functions as those on the front panel of the unit. Other functions are only
available by remote control.
As the handset uses an invisible infra-red light beam, the front edge must be pointed directly towards the receiver window at the
front of the player, without visual obstruction between them.
If the range of the remote control greatly decreases, replace the batteries with new ones. Do not mix old and new batteries - two
are required, size AAA, LR03 or SUM-4.
Please dispose of used batteries in accordance to local regulations.
Tuner Buttons:
INFO – To access broadcast information
MENU – to choose options
AUTO TUNE – finds previous/next
broadcast
MONO/STEREO – Option for weaker
FM stations
Amplifier Buttons:
PHONO – Selects Phono input
CD – Selects internal CD
TUNER – Selects internal tuner
AUX 1 – Select source AUX 1
AUX 2 – Select source AUX 2/PDI
CD Buttons:
TIME – Displays Track Time/Time
remaining
0-9 Buttons – Used to select track
numbers
CHECK – Check pre programmed
tracks
PROGRAM – Programs selection and
order of tracks
INTRO – Player plays first 10 seconds
of each track
REPEAT – Repeats whole disk or
selected tracks
SEARCH – Fast forward/backward
through track
STOP – Stop playing/Eject CD
BAND – Selects DAB or FM
STORE – Stores station as preset
SELECT – To choose preset/DAB
station
PRESET ↑ ↓ selects preset
TUNE ↑ ↓ steps up/down band
MUTE – Mutes unit until pressed
again
VOLUME UP/DOWN – sets
volume level
DISPLAY – Dims display
CLEAR – Clears selected pre
programmed track
A/B Sets repeat start/end to repeat
section of track
SHUFFLE – Plays back tracks in
random order
TRACK – Next/previous track
PAUSE/PLAY – Stop/start CD
playback
Page 10 of 25