Musical Fidelity KW250S - Manual (Page 12)

KW250S
CD SPECIAL FEATURES
Issue 3: 12th July 2006 Page 12 of 25
PLAY 7 0:39
repeat shuffle
PLAY 1 0:12
repeat track
PLAY 1 0:24
repeat disk
STOP 74
scan intro
PLAY 1 0:34
repeat a-
PLAY 1 1:55
repeat a-b
STOP 74
program 1 track 0
STOP 74
program 1 track 3
PLAY 1 0:34
shuffle disc
STOP 74
program 1 track 0
REPEAT PLAYBACK
The REPEAT button on the remote control allows the
repeated playback of either one track or all tracks on the disc.
By pressing the REPEAT button once, only the current track
is repeated, and the display shows
If the REPEAT button is pressed a second time, “repeat
disc” is displayed instead, and the entire disc is then played
repeatedly.
Pressing REPEAT a third time cancels repeat mode.
A-B REPEAT PLAYBACK
“A-B repeat” provides the option of playing just a certain
section of the disc over and over again.
Find the beginning of the required section either by listening,
or using the display time as a guide.
When the desired starting point is reached, press button A / B
on the remote control.
The display will show
When the disc has reached the end of the required section,
press the A / B button again, to display
and the unit continuously plays the selected part of the disc in
this case, the segment of track 1 from 34 seconds to 1 minute
55 seconds.
To cancel A-B repeat mode, press A / B on the remote
control.
SHUFFLE PLAYBACK
The SHUFFLE feature allows tracks on the discs to be played
in random sequence rather than the normal consecutive order.
Tracks are also played in a different order each time the disc
is restarted, or another disc loaded.
This function is obtained by pressing SHUFFLE on the
remote control with the unit either stopped or playing. If the
KW250S is already playing, play will continue in random
order until all tracks on the disc have been played.
Shuffle play is cancelled by pressing the SHUFFLE button a
second time. The unit resumes normal play function,
continuing to the end of the disc in normal order starting from
wherever it was left by the previous random selection.
From stop mode, pressing PLAY/PAUSE also begins shuffle
play.
If REPEAT is then pressed whilst in shuffle mode, a repeat
shuffle function is obtained
Pressing >>| selects the next track in random order.
SCAN INTRODUCTION
The scan-introduction function allows play back of just the
start of each track on the disc, for instance to locate a
preferred track by ear.
Press INTRO on the remote control, and if the player has
stopped, the display will show
The first ten seconds (approximately) of each track on the CD
can then be played in sequence by pressing either
PLAY/PAUSE on the front panel, or PLAY on the remote
control.
Press INTRO again to cancel introduction search mode. If
INTRO mode is cancelled while the KW250S is still playing,
the remainder of the entire disc will be played.
PROGRAMMED PLAY
The built-in program memory allows you to store up to 25
track numbers and then play them back in the held order.
Each track is stored as a “step” in the program.
With the CD loaded and the player stopped, first press
PROGRAM on the remote control. The following is then
displayed :
On the remote control, press the numeric button of the track
number corresponding to the first track you wish to store
(number 3 for example).
That track number will now appear in the display:
Press PROGRAM again on the remote control - the next
program step is selected, (prog 2) and the track number
reverts to 0 ready for a new entry.
Continue entering track numbers in the same way up to
a maximum of 25. If more than 25 tracks are attempted the
memory will not accept any extra ones, and the display reverts
to “prog 1”.