Metrologic Instruments MS7220 - Manual (Page 39)

36
D EFAULT S ETTINGS (C ONTINUED )
Default settings for “Aux” interface
The slave scanner and the MS7220 always communicate via RS232. Data
is relayed to the host via various primary interfaces.
Parameter Default OCIA RS-232
Light
Pen
IBM
46XX
KBW
Aux Baud Rate 38400 = = = = =
Aux parity space = = = = =
Aux data bits 7 = = = = =
Aux stop bits 2 = = = = =
Aux character RTS * = = = = =
Aux message RTS = = = = =
Aux Ack/Nak * = = = = =
Aux Xon/Xoff * = = = = =
Aux D/E commands = = = = =
Aux M/O commands = = = = =
Aux F/L commands = = = = =
Aux Intercharacter Delay 1 msec = = = = =
Aux Port Data Format
None
(Disabled)
= = = = =