MartinLogan E2 User Manual
Page 12
Advertising
12 Assembly
6
Pick up the transition tower assembly and insert it as
shown into the base so the three holes in the mounting
bracket line up with the holes in the tower.
7
Push the tower towards the center for proper align-
ment.
8
Once the holes are properly aligned, insert the 3
1
/
2
” x
9
/
16
” hex head lag screws through a steel washer and
into the tower. Finger tighten—do not tighten all the way.
Figure 20
Figure 21
Figure 22
Advertising