MartinLogan E2 - Manual (Page 25)

Connections—Subwoofer Towers 25
This connection method is safe for all amplifiers (see figure 51).
2-Ohm Connection
This connection is the loudest, but draws the most power
from the amplifier (see figure 52). If using this connection
method, make sure your amp can handle 2-Ohms.
Use this connection method if you wish to use two ampli-
fiers to drive the subwoofer towers (see figure 53).
Figure 51. 8-Ohm configuration. One channel
shown. Figure 52. 2-Ohm configuration. One channel
shown. Figure 53. 4-Ohm/bi-amp configuration. One
channel shown.
C
ONNECTIONS
—S
UBWOOFER
T
OWERS
8-Ohm Connection 4-Ohm/Bi-Amp Connection