MartinLogan E2 - Manual (Page 22)

22 Connections—Exos Crossover Outputs
Connect the EXOS subwoofer outputs to the amplifier(s)
for the woofer towers using either balanced or single
ended connections. Both the balanced and single ended
outputs are always on—you can use either option to con-
nect the woofer tower amplifier(s) regardless of which you
used for signal input.
Note: Use either all balanced or all single ended connec-
tions for subwoofer outputs. Do not use both.
Connect the full range outputs of the EXOS to the amplifier(s)
for the ESL/Transition tower using the same type of connection
used for the signal inputs.
Note: The full range outputs should use the same connectors
as the signal inputs. They are directly connected together.
C
ONNECTIONS
—EXOS C
ROSSOVER
O
UTPUTS
Full Range Outputs Subwoofer Outputs
Figure 47. EXOS outputs. Balanced connections shown.
E
XO
S
E
2