Momentum Sales & Marketing Modbus Plus 170 PNT Series - Manual (Page 20)

Assembling Adapter and I/O Base
20 870 USE 103 00 May 2001
3 Align the two plastic snap extensions on the Adapter with the slots on the sides
of the I/O base. The ATI connectors will automatically line up when the units are
in this position. The two devices should be oriented such that their
communication ports are facing out on the back side of the assembly.
4 Using the sidewalls of the I/O base as guides, carefully push the Adapter onto
the base until the extensions snap into place. The ATI connectors on the two
units will be mated to each other in the process.
Step Action