M&S Systems MC2000 - Manual (Page 16)

2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com Page 14
Door Stations
The MC2000 system supports two door stations. Once the doorbells are installed,
they will ring on all room stations. Whether the doorbells can be heard or
monitored from an individual room station depends on how it’s been set up. To set
up the door station functionality for a particular room station, follow the steps
shown below.
Use the same method shown below to establish the defaults for each of the two
door stations. To get to the Door Station Menu select Door Station on the Setup
Menu shown in Figure 5.
Figure 10 – Door station Menu
1. Press the Setup button for the desired door (front door or back door) as
shown on Figure 10. The Door Station Setup menu is shown in Figure 11.
Figure 11 – Door Station Setup Menu
Setup for front door
Setup for back door
Return to setup menu
Give a room
station a name
Set door system volume
Return to door station
setup menu
Door station name