M&S Systems MC2000 - Manual (Page 36)

2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com Page 34
Answering a Doorbell
When either of the doorbells ring, all room stations on the system will show the
message shown in Figure 31. The doorbell ring will interrupt any music playing or
intercom calls in progress.
If a room station has the doorbell function disabled or is in Nap or Privacy mode,
the doorbell will not ring over its speakers.
Figure 31 - Doorbell Ringing Menu
To answer the doorbell:
1. Select the Answer button (shown in Figure 31) to establish an intercom
conversation with the door.
2. If you do not want to speak with the party at the door select Cancel as
shown in Figure 31)
After 30 seconds of inactivity, the room station returns to the Greeting Menu
shown in Figure 19.
Info Menu
The information menu provides access to diagnostic and software version
information. You should only access this menu if you need to provide your dealer
with system information of if you need to reset a room station on the system.
1. To get to the Info Menu (shown in Figure 32) select the Main Menu
option from the Greeting Menu shown in Figure 19
2. Select More from the Main Menu shown in Figure 20
3. Select Info from the Setup Menu shown in Figure 5
Location or name of
the door ringing
Selecting this will establish
an intercom connection
with the door
Selecting this will
cancel the screen or
ignore the doorbell