M&S Systems MC2000 - Manual (Page 7)

2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com Page 5
Important Safety Instructions for the MC2000
The MC2000 must be installed by certified M&S Systems dealers or
installers, and must conform to all local building and electrical codes.
DO NOT expose the MC2000 to moisture. Doing so can create fire or shock
hazards and void the warranty.
DO NOT attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards and will invalidate your
warranty. Neither the hub nor the room stations contain any user-serviceable parts.
REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of shock
to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
USE ONLY M&S Systems certified replacement parts and have them installed by an
MC2000 certified dealer or installer. Unauthorized substitutions can result in fire,
electric shock, or other hazards.