M&S Systems MC2000 - Manual (Page 21)

2861 Congressman Lane | Dallas, Texas 75220 | 800.877.6631 | www.mssystems.com Page 19
5. Enter the new password following the same steps previously described and as
shown in Figure 14.
6. Confirm the password by reentering it. You will receive a password confirmation
screen. Please record the new password and keep it in a safe place.
7. To disable the password follow steps 1 – 3, but select the Disable Password
button as shown in Figure 17. The password is now disabled.
After 30 seconds of inactivity, the room station returns to the Greeting Menu as
shown in Figure 2.
Establish Intercom Settings
Pressing the Intercom key produces the same Microphone Volume and Acoustic
Delay menu seen in the Door Station option. This allows you to set the volume
control and microphone sensitivity for the intercom.
1. To adjust the intercom settings press the Main Menu button from the
greeting menu shown in Figure 2.
2. Press the More button on the Main Menu shown in Figure 3.
3. Press the Setup button on the More Menu shown in Figure 4.
4. Press the Intercom button on the Setup Menu shown in Figure 5.
5. You will see Intercom adjustment screen shown in Figure 18.
6. Use the arrows to adjust the intercom settings.
Figure 18 - Intercom Settings Adjustment Screen
Use the top set of up
and down arrows to set
the microphone volume
Use the bottom set of
up and down arrows to
set the acoustic decay
Store the settings in
the system
Cancel the settings