Multiplex Technology 8CH - Manual (Page 21)

18
4.5 MAIN MENU OPTIONS___ADVANCE 4.5 MAIN MENU OPTIONS___ADVANCE
Move the cursor to the “ADVANCE”, and press ”ENTER”, then the screen will show
the following options.
(MENU)
RECORD
TIMER
DATE
►
ADVANCE ADVANCE
ADVANCE ADVANCE
CAMERA
DETECTION
DISPLAY
ALERT
REMOTE
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT LOG
4.6 ADVANCE MENU ___CAMERA 4.6 ADVANCE MENU ___CAMERA
Move the cursor to the “CAMERA”, and press ”ENTER”, then the screen will show the
following options.
CAMERA CAMERA
TITLE BRIG CONT SATU HUE COV REC
01 110 128 128 128 NO YES
02 110 128 128 128 NO YES
03 110 128 128 128 NO YES
04 110 128 128 128 NO YES
05 110 128 128 128 NO YES
06 110 128 128 128 NO YES
07 110 128 128 128 NO YES
08 110 128 128 128 NO YES
PREV NEXT
1) TITLE:
Move the cursor to the title which you want to change, and press “ENTER” to
access the setting screen. Assign each channel a title (up to six characters
(letters or symbols…)), the default title is the channel number.
2) BRIG / CONT / SATU / HUE:
Adjust the Brightness/Contrast/Saturation/Hue of each channel.
The level is from 0 to 255. The default value of BRIG is 110, others are128.
3) COV (COVERT):
Select “YES” to mask the selected channel which is under recording.
When this function is activated, the “COV” words will shown on the screen.
4) REC (RECORD):
Select “YES” to enable the record function; Select “NO” to disable the record.
5) PREV / NEXT:
Select “PRE” to go to the previous page; Select “NEXT” to go the next page.
Take 16CH as an example Take 16CH as an example