7 advance menu ___detection – Multiplex Technology 8CH User Manual
Page 22
19
4.7 ADVANCE MENU ___DETECTION
4.7 ADVANCE MENU ___DETECTION
Move the cursor to the “DETECTION”, and press ”ENTER”, then the screen will show the
following options.
DETECTION
DETECTION
TITLE
DET
AREA
LS
SS
TS
RE
ALARM
01
ON
SETUP
07
03
02
10
OFF
02
ON
SETUP
07
03
02
10
LOW
03
ON
SETUP
07
03
02
10
HIGH
04
ON
SETUP
07
03
02
10
OFF
05
ON
SETUP
07
03
02
10
OFF
06
ON
SETUP
07
03
02
10
OFF
07
ON
SETUP
07
03
02
10
OFF
08
ON
SETUP
07
03
02
10 OFF
PREV
NEXT
DETECTION
DETECTION
DETECTION SETUP
DETECTION TIMER
1)
DETECTION SETUP:
a)
TITLE:
Show the title of each channel of the camera.
b)
DET:
Select “ON” to activate the motion detect function of each channel.
Select “OFF” to inactivate the motion detect function of each channel.
c)
AREA:
Press the “ENTER” button to set detection area.
Pink blocks represent the area that is not being detected. While the transparent
blocks is the area that is under detection.
Press “ENTER” to confirm the
start area
Press
◄ or ► to choose the
width of the area
Press
◄ or ► to choose the
height of the area, and press
“ENTER” again to confirm.
Multi-detected area
Press “
” to turn all area
under detection
Press “
” to turn all area not
to be detected
Take 16CH as an example
Take 16CH as an example