Multiplex Technology 8CH - Manual (Page 33)

30
5.2 2X DIGITAL ZOOM 5.2 2X DIGITAL ZOOM
5.4 SWITCH THE N/P SYSTEM 5.4 SWITCH THE N/P SYSTEM
1) Press “POWER” button on the DVR front panel to shutdown, and then press
“POWER” + “
►
“ to switch to PAL system.
(Press till the monitor show the video image of the DVR.)
2) Press “POWER” button on the DVR front panel to shutdown, and then press
“POWER” + “
◄
“ to switch to NTSC system.
(Press till the monitor show the video image of the DVR.)
Press “ZOOM” button on the front panel of the DVR to enlarge the picture of
selected channel (2X digital zoom). You will have ¼ view size of the enlarged
picture. Therefore use the “
◄►
“ to navigate.
2005 2005 - - MAY MAY - - 30 [MON] 14:50:37 30 [MON] 14:50:37
01 01
DIGITAL ZOOM DIGITAL ZOOM
400 GB 400 GB
2005 2005 - - MAY MAY - - 30 [MON] 14:50:37 30 [MON] 14:50:37
01 01
DIGITAL ZOOM DIGITAL ZOOM
400 GB 400 GB
1) Press the “ZOOM” button again to exit the zoom picture.
2) Press “
◄►
“ button to move the zoom position.
3) Users could also press the “Digital Zoom” button on the IR remote control panel.
5.3 KEY LOCK 5.3 KEY LOCK
1) 1) Key Lock On Key Lock On:
2) 2) Key Lock Off Key Lock Off:
Press any key (except “SHIFT” and “POWER” buttons)
and then key in the password to exit Key Lock mode.
3) 3) Password Password:
As to the password setting, please refer to “Section 4.11 ADVANCE
MENU_SYSTEM”.
c Press “MENU” + “ENTER” buttons on the DVR front panel to key lock.
d Press “F2” button on the IR remote control to key lock.
e Auto key lock: refer to “Section 4.11 ADVANCE MENU_SYSTEM”.