Minuteman UPS E700RM1U - Manual (Page 23)

22
English
(These items may require optional software or hardware)
Function Factory
Default Description User Choices
Set
inverter
output
voltage
Shut-
down
Type
Set
audible
alarm
state
Enable/
Disable
auto
restart
Battery
life in
days
Battery
install
date
UPS ID Enterprise 1U
RM Series
Date of
manufacture
1826
Enabled
Enabled
Entire UPS
120VAC
Up to 64
characters
to define
the UPS
Date of battery
replacement -
month/day/year
XX/XX/XXXX
Up to 5
characters
Enable
or
Disable
Enabled, at
low battery,
disabled
Entire UPS or
UPS output
120, 127VAC
At first battery replacement, reset
to reflect actual number of days
experience in your environment or
leave factory default
Enter the current date when
replacing batteries
Use this function to uniquely
identify the UPS in your network
configuration
Changes output voltage for bat-
tery mode operation
Enabled - the UPS will emit a
short beep when in the battery
mode. At Low Battery the UPS
will emit two beeps from low
battery warning until shutdown.
Disabled - Use only when software
is controlling the UPS or to
silence the alarm
When enabled, the UPS will
automatically restart from a low
battery shutdown when normal AC
returns
Enable/
Disable
EPO
Disabled Enable
or
Disable
Enabled - the UPS will be
completely powered off and re-
main off until the UPS is reset
Entire UPS - Turns off the entire
UPS.
UPS Output - Turns off the UPS's
output receptacles only.