Moxa Technologies NPort 5400 - Manual (Page 30)

NPort 5400 Series User’s Manual Web Console Configuration
5-5
Time server
Setting Factory Default Necessity
IP or Domain address
(E.g., 192.168.1.1 or time.stdtime.gov.tw
or time.nist.gov) None Optional
NPort 5410/5430/5340I uses SNTP (RFC-1769) for auto time calibration.
Input the correct “Time Server” IP address or domain address. Once NPort is configured with the
correct Time Server address, NPort will request time information from the “Time Server” every 10
minutes.
Web/Telnet Console
The “Disable” option for “Web Console” and “Telnet Console” is included for security reasons. In
some cases, you may want to Disable one or both of these console utilities as an extra precaution
to prevent unauthorized users from accessing your NPort 5400. The factory default for both Web
console and Telnet console is Enable.
Web console
Setting Factory Default Necessity
Enable or Disable Enable Required
Telnet console
Setting Factory Default Necessity
Enable or Disable Enable Required
ATTENTION
If you disable both the “Web console” and “Telnet console,” you can still use NPort
Administrator to configure NPort 5400 series either locally or remotely over the network. Refer
to Chapter 6 for more details.
LCM password protect
Setting Factory Default Necessity
No or Yes No Required
Select Yes to use the web console password to enter the LCM utility. If the console password is
blank, the LCM password will also be blank. To enter the password using the LCM buttons, use
the scroll buttons to locate a particular character, press SEL, enter the next character in the
password, press SEL, etc. Once the password has been entered, press SEL until the LCM screen is
activated.