Maxon Telecom MX-6880 - Manual (Page 12)

Calls to a Fixed Phone Extension
● some fixed extension phones cannot be called directly,
you need to connect to the exchange before dialling the
extension number. The phone will do all the dialling for
you with one key press provided that you enter a pause
(-) between the telephone (exchange) number and the
extension number. To enter a pause, press three
times (shown as below)
AREA CODE
Ⅲ
NUMBER
Ⅲ Ⅲ
EXTENSION
Ⅲ
(if used)
International Calls
● unlike most fixed phones, you don’t need to enter a
separate exit code to get an international line out of the
country you are calling from, simply enter ‘+’ (by pressing
until + is displayed), the code of the country you are
calling and the full telephone number
Ⅲ
COUNTRY CODE
Ⅲ
FULL NUMBER
Ⅲ
● for example, to make a call to France:
(+ displayed) Ⅲ Ⅲ FULL NUMBER Ⅲ
Call List
● called and received numbers are stored as a list in the
phone with the last number at the top of the list. Each
number is identified as outgoing, incoming, SMS or
missed. Old numbers are automatically deleted when the
call list is full. To see the list
(latest) (search)
● any displayed number on the list can be dialled by
pressing
● the call list can be reset (cleared)
Ⅲ Ⅲ Ⅲ
ENGLISH
2
2.2
ENGLISH
2
2.1
Making Calls
The network operator name must
appear in the center of the display
before you can make or receive calls.
Signal strength is indicated by the
bars in the top right of the display (six
bars for optimum signal strength).
Call quality can be affected by physical obstructions, so
moving only a few metres may significantly improve signal
strength.
National Calls
● if the country you are operating
in uses area codes, they must
be included even when making
local calls.
‘CALLING’ appears during
dialling and changes to
‘ACTIVE’ when connected
AREA CODE Ⅲ NUMBER Ⅲ
(if used)
●
to hang up at the end of the call press or close the flip
(even if the other person hangs up first)