Maxon Telecom MX-6880 - Manual (Page 9)

ENGLISH
1
1.8
If you enter the wrong PIN1 three times in succession,
your SIM will be barred from the network and the phone
will ask for the PUK 1. Refer to section 10 for help.
IMPORTANT: The supplied PIN1 (4 to 8 digits) may be
a standard number used for all SIM’s issued by your
network operator, you should therefore change it to any
personal number of your choice as soon as possible.
Please refer to section 3 for instructions.
Connecting to the Network
After unlocking the SIM, the phone will make an automatic
search for your home network or another suitable operator
in your location (SEARCHING Displayed). When
connected, the name of the operator appears in the center
of the display.
Your mobile phone is now in standby mode, ready to make
and receive calls.
EMERGENCY CALLS ONLY means that you are
outside co-operating network coverage but you can still
make emergency calls subject to signal strength.
ENGLISH
1
1.7
Set Time
● enter the current time. For
example if the time is 12:34
(Use the key
to clear an error)
Unlocking the SIM
To prevent unauthorized use, the SIM is protected by a
PIN1 (Personal Identity Number) code. When enabled, you
must enter the PIN1 each time you switch your phone ON.
This will unlock the SIM and allow you to make and receive
calls. You can choose to disable the PIN1 (refer to section
3) in which case your SIM will not be protected against
unauthorised use.
● press and hold to switch
the phone ON
●
enter the PIN1 then
(use the key to clear
an error). For example if
the PIN is set to 1234