Maxon Telecom MX-6880 - Manual (Page 35)

ENGLISH
5
5.15
the home network as soon as possible or to a network
with a higher priority
Network Search
● if you do not want to use the selected network you can
force an immediate search then make a choice from a list
of available networks in your area
Preferred Network List
●
you can edit the list of preferred operators giving you
control over which network you use when operating in
automatic or periodic mode. To add to the list
●
you also have the following options
to read the preferred list :
delete networks:
Reselect Network
● if you are roaming and are not satisfied with the selected
network, activate the Reselect feature. This will ensure
that you get connected to another network from the
preferred list or a network with a better coverage
ENGLISH
5
5.14
Network Selection
You can choose which method your phone uses to connect
you to a foreign GSM network when operating outside your
home country (roaming). Normally you would select
Automatic mode (see below) but you can choose “Manual”
or “Periodic” and force a search for available networks or
request network reselection. If you attempt to select a
network with which your home network does not have a
roaming agreement “NETWORK NOT ALLOWED” will
appear on display.
Operating Modes
● there is a choice of three operating modes
AUTOMATIC - your phone will search for the home
network first then a network from the preferred list stored
on the SIM, in list order (refer to page 5.16 to edit the list)
and if both these fail, any network which has a roaming
agreement with your home network
MANUAL - if the search for your selected network fails,
the phone will display a list of available networks for you
to choose from
PERIODIC - this is similar to AUTOMATIC mode but is
particularly useful if you are in an area of the home
country where there is more than one network present
e.g. near a border. When the home network is
unavailable the phone will select a foreign network but
will continue to periodically search for the home network.
This ensures that you will be automatically connected to
(WAIT) (SELECT)
(SELECT) (enter)
(Location)
(wait for connection)