Monessen Hearth BUF400 - Manual (Page 11)

61D1013 11
FIREPLACE FRAMING
1. Bend out the nailing flanges located on each side of the firebox.
2. Slide the firebox into prepared framing or position firebox in its final position and frame later.
3. Level the firebox by checking the top edge of the firebox. Shim if necessary.
4. Anchor firebox to the side framing members using 8d nails or other suitable fasteners. See Figure 12.
5. The canopy must be installed for safe operation of the heater. See page 13 for canopy installation details.
Figure 12 - Location of Nailing Flanges
Nail Sides
Through Nailing
Flanges
The fireplace must be installed giving
full consideration to the clearance and
height requirements identified in this
manual.
W
ARNING