MPC ATD ACTUATOR 50 ATD-313186 - Manual (Page 9)

ATD 50 Actuator
®
Operating Instructions
Page 9
3811 N. Holton Street • Milwaukee, WI • 53212 •USA • Phone • 414-906-4000 • Fax 414-906-4100 • www.MPCovers.com
4.2 Electrical
Internal View of ATD 50 Actuator¨
4.2.1 Main Power Connection
The main power supply can be switched between 115 volts and 230 volts and with 50
or 60 Hz AC power. There is an internal switch on the main power connection to
select 115V or 230V.
The main power must be externally protected with a 10 amp fast-blow fuse and
a system disconnect.
Verify that the power selection switch is set to the correct voltage before start-up!