Siemens U15 User Manual
Page 164
163
Troubleshooting
I plugged the
data cable into
my phone but my
phone did not
beep. How do I
know if the data
cable is ready to
go?
The beep indicates that you are set
up correctly. If you did not hear a
beep, make sure that both ends of
the data cable are connected—the
smaller end to your phone and the
larger end to your computer.
Finally, your computer may have
deactivated the port to save power.
Try opening an application that uses
the port, like a dial-up application,
and your computer will automatically
activate the port.
My phone
beeped when I
attached the data
cable, but my
data applications
don’t work.
Some wireless networks may not
support data transmission. If you are
roaming on an unfamiliar network,
this may be the case.
Also, remember that data
transmission usually requires a
subscription. Call your service
provider for more information.
When sending
data with the
data cable, why
does the
computer show a
connection rate
of 19200 Kbps?
19200 Kbps is the data transfer rate
of the connection between your
computer and the phone in a
standard CSD (Circuit Switch Data)
connection. The rate of the
connection between your phone and
the network is displayed on your
phone, and will be either 14400 or
9600 Kbps.
A GPRS connection may have a
higher data transfer rate.
Problem
Solution