Motorola VL50 - Manual (Page 24)

Pr
ogramming Mode
23
Entering Programming Mode
Press and hold Push to Talk and T for 3 seconds while turning the radio on. The radio beeps
and displays k , the channel number flashes, and the frequency (indicated by l )
and code (indicated by y ) display alternately.
Note: If you press and release the Push to Talk button when programming, you will return
to the front of the Programming Mode.
Selecting a Channel
1. In programming mode, press
S until the channel number flashes and the
frequency and code display alternately (this is the first setting after you
enter programming mode).
2. Press [ or ] to select the channel.
3. Press and hold Push to Talk to exit programming mode, or press S to
continue programming.
Programming the Frequency
1. In programming mode, press
S until l displays and the frequency
number flashes.
2. Press [ or ] to select the frequency.
3. Press and hold Push to Talk to exit programming mode, or press S to
continue programming.
Note: See page 34 for information on frequencies for communicating with other business
radios. If you are matching your VL50 radio to an existing Spirit GT radio, see page 40.
VL50operation.fm Page 23 Tuesday, February 24, 2004 4:46 PM