Motorola VL50 - Manual (Page 50)

VL50 Radio Programming Quick Reference
To enter programming mode, press and hold Push to Talk
and Q for 3 seconds while turning the radio on. The radio
beeps and displays k , the channel number flashes, and the
frequency (indicated by l ) and code (indicated by y )
display alternately.
Set the
Channel
Press [ or ] .
Set the
Frequency
Press S until l displays.
Press [ or ] to change the
frequency.
Set the
Interference
Eliminator
Code Press S until y
displays.Press [ or ] to change
the code.
Set
Available
Channels
Press S until = displays.
Press [ or ] to select
number of available channels.
VL50qr.fm Page 49 Tuesday, February 24, 2004 4:47 PM