Matrox Electronic Systems ATC RG-200DL - Manual (Page 13)

Matrox RG Series – User Guide 13
„ The display resolutions and refresh rates available depend on your Matrox graphics
hardware, display driver, software monitor settings, and monitor. For information on the
capabilities of your monitor, see your monitor documentation.
„ If you’re using multiple monitors, your Matrox hardware uses the same display
resolution and monitor settings for all your monitors. This display resolution and
monitor settings (such as refresh rate) are dependent on your operating system and your
display driver.
„ If you’re using BNC connectors with a Plug-and-Play monitor, the Plug-and-Play feature
of your monitor can’t be used. To use the Plug-and-Play feature of your monitor, instead
of the BNC connectors, use the 15-pin connector at the back of your monitor.
Supported VESA modes (main display)
In the table below, VESA modes supported by your Matrox graphics hardware are indicated
by a VESA mode number. Many Super VGA DOS programs use VESA modes.
Display
resolution
16 colors 256 colors 32 K colors 64 K colors 16 M colors
640 Ч 400 — 100 — — —
640 Ч 480 (VGA) 101 110 111 112
800 Ч 600 102 103 113 114 115
1024 Ч 768 — 105 116 117 118
1280 Ч 1024 — 107 119 11A 11B
1600 × 1200 — 11C 11D 11E 11F
Rows
Columns 25 43 50 60
80 — — — 108
132 109 10A 10B 10C