Matrox Electronic Systems ATC RG-200DL - Manual (Page 2)

2 Matrox RG Series – User Guide
Overview
Thank you for purchasing a Matrox ATC RG product. This product is a complete remote graphics
solution. ATC RG-200DL units can support up to two monitors. These monitors can be dual or single
link digital monitors or analog monitors. ATC RG-400SL units can support up to four digital or
analog monitors. As a remote graphics solution, it separates the CPU and hard disks of your system
from the computer peripherals – monitors, keyboard, mouse, and audio hardware.
Hardware supplied
Hardware required (sold separately)
Installation overview
To install your Matrox product:
1 Install your interface card – see “Hardware installation”, page 4 .
2 Connect your ATC RG unit, monitors, and other peripherals – see “Connection setup”,
page 7 .
Matrox ATC RG remote graphics unit
(ATC RG-400SL shown)
4 DVI-to-HD15 adapters
(ATC RG-400SL only)
Power supply *
* Multiple power cables are provided for international support.
Matrox PCI or PCIe interface card
(PCI card shown)
Dual LC optical cable
( 50 µm/125 µm or 62.5 µm/125 µm )