Siemens A57 - Manual (Page 11)

©
Sieme
ns
AG
2003, C:\Projekte
\Siem
en
s\10210-0
01\A5
7\Produkt\A57
_sug_v
2_en_04
0519_b
w
_p
k_druck\Ja
gua
r_
Ma
in.fm
left page (10) of A57 Jaguar, short, en, A31008-H5830-A1-2-7619 (24.06.2004, 06:24)
Making a phone call 10
VAR Langua
ge: en; V
A
R issue
date: 040528
When a number is busy
For automatically dialling the phone
number for up to 15 minutes at increas-
ing intervals, press §Auto dial§ . For phone
ringing when the busy number is free,
press §Call back§ (
L
). Press §Prompt§ and a
beep will remind you to redial the dis-
payed phone number after 15 minutes.
Accept call
The phone must be switched on (standby
mode). An incoming call will interrupt
any other use of the phone. Press §Reply§ or
A
.
If the phone number has been transmitted
by the network, it is displayed. If the number
and the name are stored in the Phonebook,
the corresponding name is displayed in-
stead. If set, an animation can be dis-
played instead of the bell icon (p. 12).
Reject call
§Reject§ or
B
press briefly.
Handsfree
You can put the phone aside during a call.
You can then hear the caller via the loud-
speaker.
Activate handsfree function with
§Handsfr.§
and switch on with §Yes§ .
Adjust the volume with
G
. Pressing
§Handsfr.§ switches off "handsfree talking".
Always switch off "handsfree talking"
before holding the phone to your ear!
This will avoid damage to your hearing!
Held call
Make a new connection during a call with
y menu§
¢
Hold
¢ J
(dial new phone
number, also from Phonebook:
F
). With
y menu§
¢
Swap you can swap back and
forth between both calls.
Additional costs will be incurred for the
2nd phone connection.
Call waiting/Swap b
You may need to register for this function
with the service provider and set your
phone accordingly (p. 21).
During a call, you may be advised that
there is another call waiting. You will hear
a special tone during the call. You have
the following options:
Accept the waiting call
Accept the waiting call with §Swap§ and
place the current call on hold. To swap
between the two calls, proceed as above.
Press
B
to end the current call. The fol-
lowing query is displayed: "Return to the
call on hold?" Return to the held call with
§Yes§ or end the held call with §No§ .
Reject waiting call
Reject the waiting call with §Reject§ . The
caller hears the busy tone. Set §Divert§ to di-
vert the waiting call to the mailbox for ex-
ample (setting, p. 21).
End current call
Press
B
to end the current call and ac-
cept the new call with §Reply§ .
Conference b
Make a new connection during a call with
y menu§
¢
Hold
¢ J
(dial a new phone
number).
With
y menu§
¢
Conference you can join
the held call. Repeat this procedure until
all participants are linked together (up to
5 participants).