Minicom Advanced Systems 3000 - Manual (Page 14)

DS VISION 3000
13
For full functionality of the Service utility the DS Vision system
(Broadcaster/Transmitter, Line Splitters and Receivers) must be connected and
switched on. You can however configure the system topology manually even when
the system is not operational.
Connecting the Serial Download cable
Connect the Serial Download cable to the Control port of the
Transmitter/Broadcaster and a Serial port of the computer which has the Service
Utility installed.
1 2 3 4 5 6 7 8
5VDC
CONTROL VIDEO IN
VIDEO OUT LOCAL
SERIAL
AUDIO OUT
AUDIO IN
Serial
Download
cable
To computer’s
Serial port
Figure 14 Connecting the Serial Download cable
To open the Service Utility, choose Start/Programs/DS Vision 3000 Service Utility/
DS Vision 3000 Service Utility. The Control window appears, see Figure 15.
Figure 15 Control window