Minicom Advanced Systems 3000 - Manual (Page 26)

DS VISION 3000
25
Figure 27 Select device web page
3. Select a unit and press Submit. The tuning page appears, see Figure 28.
Figure 28 Remote tuning web page
4. Adjust the setting until you have a satisfactory picture. Press Submit to activate
the new values. Press Store to save the new values. Restore – If after changing
values you change your mind, you can restore the values to how they were the last
time the Store button was pressed by pressing Restore.
5. Press reset to return to the default values.
6. Select another device to tune by clicking Select another device or close the
webpage.
Figure 29 gives an overview of the remote tuning.