Minicom Advanced Systems 3000 - Manual (Page 28)

DS VISION 3000
27
Figure 30 Service window
Firmware
Upgrade firmware to improve functionality and fix bugs. Firmware updates can be
found on the Minicom website
www.minicom.com in the Support section.
1. Save the firmware update on your hard drive.
2. Select the unit you want to upgrade, Broadcaster etc.
3. Click the Query button, a list of the firmware versions you can update appears:
Hardware, firmware, loader or FPGA. When you click one of them, the current
version appears.
4. Click Update. The Open box appears.
5. Find the firmware update and upload it.
Display Data Channel (DDC) hotkey
Display Data Channel (DDC) is a VESA standard for exchanging information
between a monitor and a video adapter.
Update the DDC during the initial installation of the system, this will enable
emulation of the DDC information to the computer when it boots the next time.
To update the DDC:
1. Select a Receiver and press Get DDC to read the DDC from the monitor attached
to it and save it to file.
2. Select the Transmitter/Broadcaster and press Set DDC to read from the saved file
and upload it to the Transmitter/Broadcaster.