Unpacking, Safety warning telecom, Unpacking safety warning telecom – Multi-Tech Systems MT4X56USB User Manual

Page 12: Figure 2-1. unpacking, Four usb v.90 modems

Advertising
background image

MultiModemUSB User Guide

MT4X56USB

12

Unpacking

The shipping box contains the MT4X56USB, four RJ-11 cables, one USB cable, an external power
supply and cable, your Quick Start Guide, and three disks (i.e., three disks for the MT4X56USB
driver software and one disk for the MT4X56USB User Guide). Inspect the contents for signs of any
shipping damage. If damage is observed, do not power up the unit; contact Multi-Tech’s Technical
Support for advice (refer to Chapter 8). If no damage is observed, place the MT4X56USB in its final
location and perform the cabling procedure.

MADE IN U.S.A

MADE IN U.S.A

RD

RD

TD CD

TD CD

TR

TR

Port 1

Port 1

RD

RD

TD CD

TD CD

TR

TR

Port 2

Port 2

RD

RD

TD CD

TD CD

TR

TR

Port 3

Port 3

RD

RD

TD CD

TD CD

TR

TR

Port 4

Port 4

Four USB V.90 Modems

Hub

System

®

Quick Start Guide

Four USB V.90 Modems

Figure 2-1. Unpacking

Safety Warning Telecom

1.

Never install telephone wiring during a lightning storm.

2.

Never install a telephone jack in wet locations unless the jack is specifically designed for wet
locations.

3.

This product is to be used with UL and cUL listed computers.

4.

Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.

5.

Use caution when installing or modifying telephone lines.

6.

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a
remote risk of electrical shock from lightning.

7.

Do not use the telephone to report a gas leak in the vicinity of the leak.

8.

To reduce the risk of fire, use only 26 AWG or larger telecommunication line cord.

Advertising