Installing your v.90 modems (windows 2000) – Multi-Tech Systems MT4X56USB User Manual
Page 31
Advertising
Chapter 3 - Software Loading and Configuration
MT4X56USB
31
Installing Your V.90 Modems (Windows 2000)
Follow the procedures below to install your V.90 modems in a Windows 2000 operating system.
1.
Click Start | Settings | Control Panel | Phone and Modems option.
2.
The Location Information dialog box is displayed.
Note: This is for first-time instal;lations only.
Enter the appropriate location information and click OK.
3.
The Phone and Modem Options dialog box is displayed. Click on the Modems tab.
Click Add.
4.
The Add/Remove Hardware Wizard dialog box is displayed.
Check (click) the “Don’t detect my modem; I will select it from a list.” option and then click Next >.
Advertising