Mintek 27HL85 - Manual (Page 19)

Intr
oduction
Connecting
y
our T
V
Using the
remote contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
19
(E)27HL85
SKIP/SEARCH
Skips back to beginning of current DVD
chapter or locates previous chapters.
SKIP/SEARCH
Skips forward to locate later DVD
chapters.
STOP
Stops the tape or DVD.
PLAY
Begins playback of a tape or DVD.
PAUSE
Press during play or record mode to
pause the picture; press again to restart.
CH y z
y selects the next higher channel;
z selects the next lower channel.
CLEAR
Press to reset the title and chapter
number.
y z x •
Press to navigate DVD menus (may not
work on some DVD players).
GUIDE
Displays channel guide.
Channel Numbers (0-9)
Press to directly access channels (as
opposed to CH
y z ).
INFO
Displays on-screen information.
POWER
Turns the selected device on and off.
Using the remote control to operate a cable
converter box, satellite receiver, VCR, DVD
player, or HTIB (home theater in a box)
If you have a non-Toshiba device or a Toshiba device that the remote
control is not preprogrammed to operate, you must first program the
remote control to recognize the device (if you have not already done
so). See pages 17 and 18.
To use your TV remote control to operate a:
• Cable converter box or satellite receiver, set the Device Switch to
CBL/SAT.
• VCR, set the Device Switch to VCR.
• DVD player or HTIB, set the Device Switch to DVD.
Note:
Even after the TV remote control is
programmed, it may not operate certain
features on your other device. If this happens
and you wish to use those features, you will
need to use the device’s original remote
control.
1 2 3
4 5 6
7 8 9
ENT 100 0
POWER RECALL
CHRTN
FAV
FAV
TV / VIDEO
+10
PIC SIZE
EXIT
INFO
STOP
POP DIRECT CH MUTE SLEEP
TV/VCR PAUSE
FF REW SKIP / SEARCH
SPLIT
SWAP POP CH
LIGHT REC
CH SCAN
FREEZE SOURCE
PLAY
TV
CBL/SAT
VCR
DVD
VOL CH
FAVORITE
ENTER
DVDMENU
MENU
T
O
P
M
EN
U GU
ID
E
CL
EA
R
E
N
TE
R
CT-90159
FF
Fast-forwards the tape or DVD.
(Press during play mode to view the
picture moving rapidly forward.)
Point the remote control
directly at the device.
+10
Press to directly access
DVD chapters higher than 10.
TOP MENU
Accesses a DVD’s top menu.
ENTER
Required by some VCRs and cable
converter boxes to change the channel.
Device Switch
Set to “TV” to control the TV; “CBL/SAT” to
control a cable converter box or satellite
receiver; “VCR” to control a VCR; “DVD” to
control a DVD player or HTIB.
TV/VCR
To view one program while recording
another, press to select TV mode.
REW
Rewinds the tape or DVD. (Press during play mode
to view the picture moving rapidly backward.)
REC
Starts tape recording.
DVD MENU
Accesses DVD menus.
#01E16-21_27HL85 3/16/05, 9:21 PM 19
Black