MITSUBISHI ELECTRIC WD-62628 - Manual (Page 14)

1 Chapter 1. Television Overview
Remote Control
Overview
Figure 1, following page
1. Slide Switch: Selects the A/V product to be
controlled by the remote control. Select TV for
NetCommand® device control.
2. Numbers: Individually select channels or enter
information into menus.
3. SQV (SuperQuickView™): Scans through
memorized lists of favorite channels.
. CH(ANNEL)/PAGE: Scans up or down through
memorized channels. Pages up and down through
screens when used with TV Guide On Screen®,
ChannelView™, a satellite receiver, some cable boxes,
memory card playlists and JPEG thumbnails. Pages
up and down through DVD chapters.
5. DEVICE: Displays the Device Selection menu in
which you can select the device to view (ANT-1 and
ANT-2, or devices connected to the TV’s inputs,
including IEEE 1394 devices).
6. ADJUST: Press to navigate menus,
change settings, and move the PIP on-screen
location. Operates many NetCommand® functions.
Navigate TV Guide On Screen® and change settings.
7. TV MENU: Displays the on-screen menu
system.
8. ENTER: Selects a channel number or menu item.
9. DEVICE MENU: Displays the menu for devices
connected to the TV, including CableCARD™. For
VCR or DVDs, the first press displays the transport
menu, the second press displays the VCR or DVD
menu. Displays and removes options menus for TV
Guide On Screen. Opens the Media Dialog Box for
memory cards.
10. INFO: Press to display an on-screen summary of the
current device used and any broadcast information
available (including current V-Chip information). See
Appendix B for details on the on-screen display.
While in TV Guide On Screen, press repeatedly to
cycle through the available info box sizes.
11. V-CHIP: Turns the V-Chip Lock on or off.
12. PIP/POP: Turns on PIP and cycles through PIP and
POP display choices.
13. PIP CH: Scrolls up or down through memorized
channels for PIP
1. PIP DEVICE: Displays PIP Selection menu to select
the PIP or POP image source device
15. REC (Record): Displays the Record menu for
setting up recordings. Records with a VCR, sets up
recordings for DVCR, IEEE 1394 devices, or while in
ChannelView. Starts a recording when the Listings
screen for TV Guide On Screen is displayed.
16. REW/REV: Rewinds a VCR. Reverses scan with a
DVD, A/V Disc, or memory card file.
17. POWER: Turns power on and off for the TV and
other A/V products.
18. QV (QuickView™): Switches between the current
channel and last channel viewed.
19. SUB/CANCEL: When entering digital channel
numbers, adds separator between main and sub-
channel numbers. Clears SQV and some menu
entries, and cancels recordings.
20. VOLUME: Changes sound level.
21. MUTE: Turns sound on or off.
22. GUIDE: Displays or removes TV Guide On Screen
or ChannelView for ANT-1 and 2. Displays Track List
for A/V Disc. Displays program guide for satellite
receiver and cable boxes, or DVD Disc menu.
Displays thumbnails or playlists for memory card files.
23. Light: Located on the right side of the remote
control, this feature illuminates buttons or labels.
2. HOME: Exits TV on-screen menus and the TV Guide
On Screen system and returns to TV viewing.
25. AUDIO: Selects individual audio settings for
adjustment.
26. VIDEO: Selects individual video settings for
adjustment.
27. EXCH: Exchanges PIP or POP and main TV picture.
28. SLEEP: Sets the TV to turn off within 2 hours. See
the next page for setup instructions.
29 CONNECT: Initiates IEEE 1394 peer-to-peer
connections.
30. FORMAT: Changes the shape and size of the main
TV picture.
31. PAUSE: Pauses a live TV picture when no PIP or
POP image is displayed. When PIP image is visible,
pauses that image. Pauses a VCR, DVD, A/V Disc, or
memory card file.
32. PLAY: Plays a VCR, DVD, A/V Disc, or memory card
file.
33. FF/FWD: Fast forward a VCR or memory card file, or
fast play a DVD or A/V disc.
3. STOP: Stops play of a VCR, DVD, A/V Disc, or
memory card file.