MITSUBISHI ELECTRIC WD-62628 - Manual (Page 62)

62 Chapter 4. Netcommand Functions
Copy-Protected Material
When attempting to record copy-protected material, the
Record functions of the NetCommand and IEEE 1394
systems may be prevented or stopped. If you have a
recording that is tagged “Record Once,” NetCommand
will change the tag to “Record No More.”
Restrictions for Traditional VCRs
• Your VCR should be connected directly to the
RECORD OUTPUT AUDIO and VIDEO outputs.
• The VCR must be set manually to “Line Input.”
Display the Device Selection menu, highlight the VCR
and press GUIDE to change VCR inputs.
• If NetCommand is set up, the TV can select channels
on compatible cable boxes for recordings. Leave the
cable box turned on.
• If the source device or recording device does not have
separate power On and Off features, then leave that
device powered On.
• You cannot record from source devices connected to
the TV Component inputs or HDMI 1 or 2 connections.
NetCommand®-Controlled Recordings, continued