Intelligent Motion Systems intell-print om-192-s - Manual (Page 13)

13
9. Accessories
1) Paper: 57.5mm+/-0.5mm(width) , 60mm max(roll diameter) , 85 microns
(thickness)
PP-225-80 1-ply paper roll
PP-225-75WC 2-ply paper roll
2) Ribbon specification : ERC-09 P (Purple) or B (Black) Standard
cartridge
ERC-22 P (Purple) or B (Black) Long Life Cartridge
3) Interface Cable: 6 foot long, shielded cable with molded connectors.
CBL-625M-25F-STR Parallel cable
CBL-625F-25M Serial cable w/ DB-25F host
side
CBL-69F-25M Serial cable w/ DB-9F host side
4)Power Supply: Output: 9VDC 1.5A , 2.1mm x 5.5mm female plug , center
positive.
OMPS190-915-NA 120VAC input
OMPS190-915-EU 220-240VAC input
OMPS190-915-SMPS 90-240VAC input
10. Troubleshooting
1) IF THE POWER LED DOES NOT COME ON.
Make sure the power supply cables are securely plugged into the printer, the
adapter, and the power outlet. Also, make sure that power is supplied to the
power outlet. If the outlet is controlled by a switch or timer, use another outlet.
1)IF THE POWER LED IS ON BUT PAPER DOES NOT FEED.
This may be a head jam condition, first turn off the printer and make sure there
is no paper stuck in the mechanism; however do not use force or a sharp object
to remove the jammed paper.
2)IF THE PAPER IS NOT FEEDING PROPERLY.
If the printout looks squashed, make sure that the paper roll moves freely on the
paper holder. If the paper is wrinkled on the edges, the roll may not loaded
correctly. In that case remove the paper and reload.
4) IF THE PRINTER SOUNDS LIKE IT IS PRINTING BUT NOTHING IS