Intelligent Motion Systems intell-print om-192-s - Manual (Page 16)

16
PIN FUNCTION PIN FUNCTION
1 STROBE 14 N.C.
2 DATA 0 15 N.C.
3 DATA 1 16 N.C.
4 DATA 2 17 N.C.
5 DATA 3 18 N.C.
6 DATA 4 19 +9V
7 DATA 5 20 +9V
8 DATA 6 21 GND
9 DATA 7 22 GND
10 ACK 23 GND
11 BUSY 24 GND
12 N.C. 25 GND
13 N.C.
Printer is capable of receiving data from the host while the BUSY signal is in the
LOW state and communication will be interrupted when the signal is HIGH>
12. COMMAND CODES
12.1 COMMAND SUMMARY FOR DH1000 EMULATION
FUNCTION KEYSTROKE HEX DECIMAL
HORIZONTAL TAB CTRL I 09H 9
LINE FEED CTRL J 0AH 10
FORM FEED CTRL K 0BH 11
VERTICAL TAB CTRL L,n 0CH,n 12,n
CARRIAGE RETURN CTRL M 0DH 13
DOUBLE WIDTH CTRL N 0EH 14
SINGLE WIDTH CTRL O 0FH 15
RESET CTRL Q 11H 17
UNDERLINE CTRL U 15H 21
UNDERLINE RELEASE CTRL X 18H 24