InStep SS150 - Manual (Page 2)

2
IMPORTANT
We appreciate your purchase of one of our many fine products. We are sure that you will be satisfied with your
selection. We regret that although great care and effort have been taken, occasionally problems may occur.
PLEASE DO NOT RETURN PRODUCT TO THE STORE. To ensure prompt and correct handling of problems, or to
answer questions, please contact us at either our Toll-Free Customer Service number or E-mail us at our address
listed below. Service will be quicker if you have your model number (found on the product and box) along with this
instruction sheet ready when calling. If you have any questions concerning the safe use of this product, please
contact us at 1-800-242-6110 and speak to our Customer Service Representative or E-mail us at [email protected] or
visit us at www.instep.net
Tires are shipped deflated, DO NOT OVERINFLATE. Due to their size, PLEASE INFLATE SLOWLY WITH SHORT
BURSTS OF AIR to 20-25 PSI maximum. 25 PSI will provide a comfortable ride for your child.
Model SS100 and SS150 Saturn Stroller Assembly Instructions
Parts List
Description Qty. Description Qty.
Frame Assembly 1 Parent Console 1
Fender 1 Child tray 1
Fender screws #4 x 16mm 4 Infant car seat adapter bar 1
Front Wheel Assembly Dual 8" 1
Rear Wheels 10" 2
Stroller Assembly and Use Instructions
Step 1. Unfold Stroller
Grasp frame as shown and open until side latches engage (Figure A1).
To fold stroller:
Pull the one-hand fold handle toward the stroller handle, stroller will automatically begin to fold (Figure A2).
You can also fold the stroller by pulling the side latches towards the stroller handle (Figure A3). Continue
folding, pushing frame together and hook the storage latch (Figure A4).
A1 Side Latches A2
Side Latches
Front Wheel
Post
One-Hand
Fold Lever