InStep SS150 - Manual (Page 3)

3
Step 2. Rear Wheel Assembly
Turn stroller onto its side. Grasp rear wheel in one
hand, slide wheel’s axle into hole in rear of frame
(Figure B1). Check to see that the wheel is properly
inserted by pulling on the wheel firmly, the wheel
should not come off if fully inserted/locked. Repeat
for other side. To release wheel push up on axle
release lever while pulling off wheel (Figure B2).
To engage rear brakes:
Step lightly on the side brake levers or rear brake
bar to engage brakes. To disengage, lift up on
brake levers or bar (Figure B3).
A3
A4
B2
B3
B1
Side Latches
Storage Latch
Rear
Axle
Axle Release Lever
Rear Brake Bar
Rear
Frame
Axle Release Lever
Brake Levers