IPSO DR50 User Manual
Page 14
Advertising
Page 14
Gas Piping Installation
1 . The installation must conform with local codes, or in
the absence of local codes with the National Fuel
Gas Code as, ANSI Z223.1 or the CAN/CGA-
B149, Installation Codes.
2 . Check identification nameplate for type of gas for
dryer.
3. Check the altitude of dryer.
4 . Check with utilities company for proper gas
pressure and gas supply line.
5 . Natural gas only—check the gas pressure inlet
supply to dryer, 11” water column (27.4 mbar)
maximum. Manifold pressure—3.5” water column
(8.8 mbar) pressure .
6 . L.P. gas only—manifold pressure—13” water
column (32.4 mbar) maximum.
CAUTION: Low gas pressure and intermittent
gas will cause gas ignition problems and
inadequate drying of laundry.
GAS PIPING
INSTALLATION
Advertising