Integra TUN-3.7 - Manual (Page 24)

24
Listening to XM Satellite Radio —Continued
Press the [Display] button repeatedly to cycle
through the available information.
Note:
If the category, artist, or song title is not available,
“- - -” will be displayed instead.
■ XM Radio Messages
The following messages may appear while using XM
Radio.
CHECK ANTENNA
The XM Mini-Tuner and/or antenna is not connected
properly. Check the connection.
UPDATING
The XM user encryption code is being updated. Please
wait.
NO SIGNAL
The signal is too weak. Check the XM Mini-Tuner
and/or antenna connection and reposition it for the best
reception.
LOADING
The TUN-3.7 is tuning or decoding audio or text data.
Please wait.
OFF AIR
The XM channel you selected is not currently broad-
casting. Select another channel.
You can check the signal strength of the XM Radio sig-
nal and adjust the position of the XM antenna accord-
ingly.
Displaying XM Radio Information
Display Display
Setup
Enter
Channel number
Preset number
Channel name
Song title
Artist name
Category
Channel number
& preset number
Positioning the XM antenna
1 Press the [Setup] button.
2 Use the Up and Down Arrow
[
]/[ ] buttons to select
“Antenna Aiming,” and then
press [Enter].
3 Adjust the position of the XM
antenna so that the satellite
(SAT) signal strength bar is as
long as possible.
If you can’t receive the satellite (SAT)
signal, adjust your XM antenna so that
the terrestrial (TER) signal strength bar
is as long as possible.
Press the Down Arrow [ ] button to
display the terrestrial (TER) signal bar.
Terrestrial signals are only available in
certain areas.
So long as the signal strength is good,
you can enjoy XM Radio by using
either satellite or terrestrial reception.
Remote controller
Remote controller